Previous | Next Adobe Acrobat version available

SUPRENE FIRST AID FIRE REEL HOSE - FRH 3169 series

Special Features

• Abrasion resistance - excellent
• Made from Cadmium free materials
• Resistance to a wide range of chemicals (see Chemical Resistance Table)
• Outstanding U.V. / Ozone resistance
• Silicone free
• Ageing - outstanding resistance
• Good flexibility

General Description

Suprene First Aid Fire Reel Hose is yet another quality product to be borne out of our long term materials and hose technology development.

We have continued to exploit the benefits of Rubber and P.V.C. to produce a Rubber P.V.C. Alloy (T.P.E.). This innovative step has resulted in the introduction of Codeflex Suprene First Aid Fire Reel hose.

This addition to the Codeflex Suprene range feels and looks like rubber without some of the negative aspects. As you will find from information given overleaf, our Codeflex Suprene Fire Reel Hose exceeds the requirements laid down by BS.3169 Class B, Type 1 specification in all areas.

Codeflex Suprene Fire Reel Hose has a a black inner with a distinct "Fire Red" outer in two sizes, 19mm and 25mm bore.

Print identification e.g.: "C.D. logo, BS.3169 : 1986 B1/19mm/11-92/15 BAR PATENT 0036674, DATE CODED"

Technical Data

CODEFLEX SUPRENE FIRST AID REEL HOSE FRH 3169
(U.K. And European Sizes)

Product Ref	Size (mm)		Weight per coil kgs	Working pressure	Burst pressure
	I.D.	O.D.		3:1 Safety Factor
FRH19	19	28	14.00	15 bar	60 bar
FRH25	25	36	19.99	15 bar	62 bar

Stock Lengths

19mm: 30.5mt*, 35mt, 36.6mt, 45mt, 60mt, 92mt and 100mt.
25mm: 25mt, 30.5mt* and 35mt.

Relevant Test Specification	BS 3169 Requirements	CDL Fire Reel Hose Test Result
Dimension & Tolerance BS 5173 101.1	Bore Lining 19mm+/-0.75mm 25mm+/-0.75mm Thickness Cover 2.0mm min Cover Thickness 1.5mm min Thickness variation not to exceed 15% of mean thickness. Concentricity between inside and outside dia not to exceed 2.0mm	+0.30mm -0 13mm 2.0mm min. 1.5mm min. Controlled within 10% maximum Controlled within 0.5mm
Maximum Mass (weight of hose)	19mm - 0.75kgs/m 25mm - 0.90kgs/m	0 50kgs/m (max) 0.70kgs/m (max)
Physical Properties of Lining & Cover BS 903 PT A2	Tensile Strength & Elongation at Break Tensile not less than 6 0 MPa Elong @ break - not less than 250%	13.7MPa 460%
BS 903 PT A19	Tensile Strength & Elongation at Break After accelerated ageing 96hrs @ 70°C shall not vary from unaged values by more than +10% - 30%	13.6MPa (-1%) 385% (-16%)
BS2782 Methods 465A & 465B	Loss in Mass on Heating Cover not greater than 4% (both methods)	465A - 0.66% 465B - 0.56%
BS 5173 103.1	Adhesion Between lining and reinforcement Between layers of reinforcement Between cover and reinforcement Not less than 1.75kN/m	Only the lining to outer cover separable both sides greater than 3.5 kN/m
BS 5173 102.1	Hydrostatic Requirements Change in dia at 15 bar +7% -5% Change in length at 15 bar +12%-6% Burst Pressure 48 bar	+4.28% +4.72% -0.20% 0% 60 bar 62 bar
BS 3169 Appendix A	Bend Test Major axis shall not increase more than 9%	+6% +7%
BS 5173 106.3 @ 40°C	Resistance to Ozone of Hose Cover	Satisfies the requirements of clause 7.5
BS 3169 Appendix B	Kink Test	Satisfies the requirements of clause 7.6
BS 3169 Appendix C	Resistance to Hot Surfaces	Satisfies the requirements of Class B Hoses described in clause 7.7
BS 2782 Part 1 Method 141A	Fire Retardency Rating	CDL Fire Hoses have a CO1 of 25% 02

---

© Copely Developments Ltd - Thurmaston Lane - Leicester - LE4 7HU - England
Phone: 44 116 276 5881 - Fax: 44 116 246 0117
Email: info@copely.com